UNION III - Airush Kiteboarding

UNION III

UNION III

UNION III

  • hohe Sprünge, Hang Time und ordentlich Dampf in Kiteloops
  • Allroundeigenschaften für Aufsteiger bis Fortgeschrittene
  • Unhooked Performance

Der komplett neue UNION III wurde von Grund auf überarbeitet, um seine Schlüsselqualifikationen noch besser abzubilden.

Der UNION III bringt Dich höher und liefert mehr Hangtime, wenn es um „BigAir“ geht und ist gleichzeitig reaktiver und direkter an der Bar. Der Shape wurde so verändert, dass der Kite etwas näher am Windfensterrand sitzt, ohne dabei die leichte und ultradirekte Lenkung zu beeinträchtigen.
Ein neues Design der Wingtips verhindert ein „Backstalling“ des Kites, während eine noch linearere Kraftentfaltung die Allroundeigenschaften für Freeride, Freestyle oder Wave noch weiter steigert.

Der UNION III ist der nächste Schritt für den Lithium Fahrer, der auf der Suche nach noch besseren Sprungeigenschaften und schnellerer Depower ist oder für Freestyler, die auf gute Unhooked Performance Wert legen aber auf eine große Depowerrange und ein fehlerverzeihendes Flugverhalten nicht verzichten wollen.

Key Features
Technoforce D2

Technoforce D2

INTERGRATED DYNEEMA

INTERGRATED DYNEEMA

DYNEEMA LOAD FRAME V4

DYNEEMA LOAD FRAME V4

5M I 6M I 7M I 8M I 9M I 10M I 12M I 14M I 16M
LASTS TWICE AS LONG

LASTS TWICE AS LONG

The all-new Airush Dyneema Load Frame featuring WebTech is the key to having the lightest single strut kite on the market and not compromising on durability.

By expanding our exclusive Dyneema Load Frame throughout the areas normally occupied by Dacron with Webtech, we are able to eliminate this heavy fabric and utilize the Dyneema web fibers instead – weighing less without compromising strength.

We achieve all of these weight savings while still using our legendary TECHNOFORCE D2 by Teijin and Dimension Polyant Leading edge and strut material.
INTERGRATED DYNEEMA

INTERGRATED DYNEEMA

Central to the concept of the Load Frame are the lightweight Dyneema yarns, where each single yarn can carry almost 40kg of load. These are integrated into the canopy through a reinforced taping that allows them to elongate when under extreme load, absorbing most of the shock that traditionally would have run through the canopy. At the same time, they carry the primary load of the canopy, preventing stretch and increasing long-term performance.
TECHNOFORCE D2

TECHNOFORCE D2

This premium fabric is used in conjunction with the Dyneema Load Frame for the ultimate combination of durability and performance. Ongoing testing has highlighted the lowest stretch and UV Stability, along with the highest long-term reliability of any fabric available.
XL INFLATE/DEFLATE VALVE

XL INFLATE/DEFLATE VALVE

THE XL INFLATE/DEFLATE VALVE FEATURES AN INSANELY EASY AND FAST WAY TO INFLATE AND DEFLATE YOUR KITE. THE LARGE OPENING CREATES MAXIMUM FLOW OF AIR AND REDUCES FATIGUE AND STRESS ON YOUR PUMP. THIS IN CONJUNCTION WITH THE AIRUSH HIGH VELOCITY PUMP MAKES INFLATING YOUR KITE EXTREMELY FAST TO GET YOU ON THE WATER AS QUICKLY AS POSSIBLE.
SAFETY HANDLES

SAFETY HANDLES

ON ALL AIRUSH KITES, THE EMERGENCY SAFETY HANDLES ARE PROVIDED ON EACH WINGTIPS. THIS MAXIMIZE THE CONTROL AND SECURITY WHEN PERFORMING SELF-RESCUING.
AIRUSH BUMPERS

AIRUSH BUMPERS

AIRUSH BUMPERS ARE FOUND THROUGHOUT THE LEADING EDGE OF THE KITES TO REDUCE WEAR AND INCREASE DURABILITY ON ROUGH SURFACES. THESE BUMPERS ARE KEY FOR INCREASING THE LIFESPAN OF AIRUSH KITES.
KEVLAR REINFORCEMENT

KEVLAR REINFORCEMENT

KEVLAR, FOUND IN BULLET PROOF VESTS, IS FOUND THROUGHOUT THE AIRUSH KITES. THESE KEVLAR REINFORCEMENTS ARE ONLY PUT IN THE MOST CRITICAL AREAS TO PROTECT FROM WEARING WHILE STILL MINIMIZING WEIGHT WHICH AFFECTS THE KITES PERFORMANCE.
FBI ONE PUMP VALVES

FBI ONE PUMP VALVES

THE OVERSIZED SPIS VALVE (SINGLE POINT INFLATION SYSTEM) OPTIMIZES INFLATION AND DEFLATION. THE FAST BLADDER INFLATION (FBI) FEATURES INCREASED WALL THICKNESS AND OVERSIZED DIAMETER TUBING. THIS ELIMINATES TUBE KINK AND REDUCES STRESS ON YOUR PUMP, RESULTING IN A QUICK AND EASY INFLATION.
WASTE 2 WEAR KITEBAG

WASTE 2 WEAR KITEBAG

Around 36 billion plastic bottles are produced every year, and more than 30% of non-recycled plastics will end up in the rivers or oceans. Consider this, and remember that these waterways are our playground. We have teamed up with one of the leaders in recycled plastic, and now we produce many of our kitebags and key accessories in collaboration with Waste 2 Wear.

Waste 2 Wear recycle 100% post-consumer plastic bottles into eco-friendly fabrics. This unique process involves turning environmentally damaging waste into useable, sustainable yarns. The recycled yarns are then combined with natural fibers to be woven or knitted into eco-friendly fabrics, suitable for garments, home textiles and accessories.

Performance

0
1
2
3
4
5
6
7
8
9
10