2017 AIRUSH CORE FOIL TECH - Airush Kiteboarding

NEWS

09/02/2017 | 2017 AIRUSH CORE FOIL TECH

2017_Airush_Core-Foil-Tech

 

INNOVATIVE FREERIDE FOIL PERFORMANCE

The Airush Core Foil is a true performance Foil that redefines beginner to advanced foilboarding. Discover the foil that gives you the best combination of ease of use with true advanced characteristics. The Airush Core Foil utilizes unique design characteristics than any production foil on the market to allow for immense versatility. Designed with premium quality in mind, the mast and the fuselage are constructed from aviation grade anodized aluminum alloy 6082 T6, with assembly parts precision CNC milled. A full fused connection between the mast and front fuselage means that the front wing, which deals with the majority of the load, has the least flex possible. These details make the Core Foil a stand out against it’s competitors, paired perfectly with the Core Foil Board.

 

 

Anhedral front wing in conjunction with a dihedral back wing creates the greatest amount of stability with minimal drag. Essential for straight line, carving and high-speed stability.

 

2017_Airush_Core-Foil-Tech-2

 

1) Adjustable Rear Wing Pitch To Increase Slow Speed and Stability

2) The front and rear wing are placed further apart in a horizontal plane to increase maneuverability and stability. The Rear wing is placed higher to avoid the turbulent wake of the front wing.

3) Simple low drag fittings between front and rear wing make for easy assembly and tuning.

 

Read the review here: KITEWORLD REVIEW

 

FOIL ASSEMBLY INSTRUCTIONS:

 

STEP ONE:

Place rear wing into rear fuselage slot and tighten both screw to the desired trip position. To adjust the trim loosen both screws and slide to desired trim.

STEP TWO:

Insert rear fuselage with rear foil facing upwards.

STEP THREE:

Tighten internal grub screw. Take care not to over tighten this part, as it may damage the insert.

 

1

 

STEP FOUR:

Remove front screws, prior to front wing assembly. It is recommended to stores the part with the screws inserted.

STEP FIVE: 

Attached front wing. Ensuring the LONGER screw is in the front of the wing. Tighten Front screw partially. Fully tighten once rear screw is inserted.

STEP SIX: 

Tighten Rear screw partially before tightening front and rear screws completely.

 

3

 

STEP SEVEN: 

Place the board deck down and insert foil into fin box.

STEP EIGHT: 

Tighten rear screw in fin box.

STEP NINE: 

Tighten front screw into fin box. On certain models this part is combined with the footstrap connection.

 

3

 

View the product online: Core Foil Board.

Share Button